Testing Anvil For Type N Concrete Test Hammers

« Prev

Next »

Testing Anvil For Type N Concrete Test Hammers


Dalian Taijia Technology Co.,Ltd 1) Test anvil is the excellent instrument for assessing test hammer.

2) Test anvil is made from the best steel and especial tool steel. Contact area between anvil core and anvil body get excellently polished, and the rigidity of anvil core is HRC58~62

3) Test anvil must be located on horizontal ground, take test hammer operation on it and check the rebound value, qualified concrete test hammer will get a average rebound value of 80±2 on test anvil, qualified mortar test hammer will get a rebound value of 74±2.

4) The test anvil, as a calibration instrument, after each 5000 or 8000 test, the test surface can be polished and then continue using, but the rigidity of core must be HRC58~62, or abolish it.

5) Test anvil usually stored in dry dustproof place, protect its rebound surface from collision

General details:

Sold by: JudyTian (46 / # 1) Grade JudyTian
Email: flowmeters@aliyun.com

Ad Details

Ad id: 375755
Ad views:319
Ad expires: 2019.09.07 (in 16 days)
Added: 2019.05.10
Current rating (after 0 votes) Grade

More ads in this category Ads from this seller Contact seller Tell-a-friend Print


We have a total of 164310 users and 7718 ads. There have been 2293433 ad views.